wtf is up with this (Loki's ghetto tastic manifold)
|
The bolt pattern is for a T3, the port is small obviously because they didn't use box tubing that matches the T3 turbine inlet instead of that puny piece of pipe. Can u haz flowz restricionz? I particularly like the head flange, the started cutting it and stopped on both sides.
|
ghetto, but better than SS autochrome.
|
Haha I think thats the manifold i made in school
|
Originally Posted by Mach929
(Post 205469)
http://cgi.ebay.com/ebaymotors/Mazda-Miata-1-6-turbo-manifold-w-T3-flange-fits-90-93_W0QQitemZ290202027513QQihZ019QQcategoryZ33632QQ ssPageNameZWDVWQQrdZ1QQcmdZViewItem
super small port for a t3 |
Originally Posted by Arkmage
(Post 205498)
ghetto, but better than SS autochrome.
|
Originally Posted by cjernigan
(Post 205477)
The bolt pattern is for a T3, the port is small obviously because they didn't use box tubing that matches the T3 turbine inlet instead of that puny piece of pipe. Can u haz flowz restricionz? I particularly like the head flange, the started cutting it and stopped on both sides.
The tube was what i had left over :) cheaper than box tubing. Plus it was a tiny turbo. |
you as ghetto as that thing is, I may still get it. I been looking for a cheap T3 1.6L manifold.
Loki style here I come... lol |
Originally Posted by wildfire0310
(Post 205675)
you as ghetto as that thing is, I may still get it. I been looking for a cheap T3 1.6L manifold.
Loki style here I come... lol But its got half inch flanges that were milled true. and schedule 40 runners |
Originally Posted by cjernigan
(Post 205477)
Can u haz flowz restricionz?
|
just redo the turbo flange and it would be a nice manifold
|
Originally Posted by Loki047
(Post 205719)
just be aware it needs a custom d/p
But its got half inch flanges that were milled true. and schedule 40 runners just redo the turbo flange and it would be a nice manifold |
Originally Posted by Mach929
(Post 205816)
just redo the turbo flange and it would be a nice manifold
|
Originally Posted by wildfire0310
(Post 206123)
Well I have a T3 turbo, not matter what manifold I going to need a custom DP.
That is my opinion also. |
http://www.boostedmiata.com/exhaust/...nifold_002.jpg
http://www.boostedmiata.com/turboins...egidone001.JPG http://www.boostedmiata.com/turbo/begi_manifold_006.jpg it may be a custom BEGi DP, but nothing they they couldn't whip up easily for you and send it along with your manifold. |
Out of all the work put into that thing the manifold flange cut out on the bandsaw looks like a fifthgrader did it? Talk about going outside the lines!
|
ha ha, I actually bought it from the kid for a future project. how well did it flow on your car?
|
Originally Posted by zoom2zoom
(Post 208584)
ha ha, I actually bought it from the kid for a future project. how well did it flow on your car?
its cool |
Originally Posted by zoom2zoom
(Post 208584)
ha ha, I actually bought it from the kid for a future project. how well did it flow on your car?
|
Originally Posted by Loki047
(Post 208667)
I dont know never really ran it. I got it all together dp mainfold turbo and piping right before my sr year. With all the stuff going on that year I didnt have time to touch it. I started work a day after i graduated (grad on sunday started monday) and realized i had no time to install the emanage and shit. SOld it all and started over
|
yeah, search for pics of my intercooler setup, called devil horn or something.
|
i've seen far far far worse.
|
Originally Posted by Loki047
(Post 208996)
yeah, search for pics of my intercooler setup, called devil horn or something.
|
they should be around somwhere
|
it's not that big a deal, I have an extra engine/chassis to do the testing on when it arrives. I have a few t3's in the garage and was able to get the downpipe with 2 of them, so should be able to get it put together on the cheap. plus I'll be learning to weld soon and will buy a welder.
|
it arrived yesterday and the welds look pretty good, was it your first attempt at a manifold?
|
What's the crap sticking into the ports (#2 and #3)?
http://i12.ebayimg.com/02/i/000/d5/d1/e663_3.JPG |
That is melted metal from the welding or slag.
|
yeah grind that shit down.
|
oh I will be, have a nice grinding tip to get in there and make it smoother.
|
All times are GMT -4. The time now is 04:03 AM. |
© 2024 MH Sub I, LLC dba Internet Brands