ApexOnYou's 1/4 Mile Progress Thread
Might as well just make one thread instead of making new ones every time I go to the dragstrip. I know most of you could care less but I want to keep a log so that I dont have time slips nailed to my wall anymore. :p
New best time today: T3/T4E @ 10psi (EDIT: 12psi due to inaccurate gauge) on Azenis RT615, no EMS R/T: .230 60': 1.882 330': 5.349 1/8: 8.218 @ 86.61mph 1000': 10.659 1/4: 12.771 @ 110mph This was the ONLY clean pass I made all day (5th pass IIRC), every other run, I had a miss shift. It dawned on me that my exhaust is dumping on the side of the transmission (derrr, I know..), so I let the car cool down completely and made the last pass and didnt have any problems. I think I might try to make a brace from the engine to the chassis to keep the drive train from flexing around so much, im sure that has alot to do with it being difficult to get into gear under load. |
damn pretty nice time specially for 10 psi
|
i just came back and managed to hit a 13.2@105.22mph...on slicks...wow your car is awesome!!!:bigtu:
|
|
Damn nice. I don't understand how you can have enough fuel with stock injectors though. I think I maxed mine out with my jrsc around 165whp. Damn good though. You give me hope that mine might be in the 12's. So what are you using for fuel/ignition just an FMU and timing retard box or something?
-Michael- |
Im as shocked as you are on that one. I am running it alittle on the lean side, but its still safe enough to have survived 5k miles of it, even running 93 most of the time. I didnt have my cam in the car Sunday so I cant remember the AFRs but I dont think I even hit 14. I never had a problem with detonation untill I started adding more timing on Sunday. I felt a faint "hesitation" in 4th gear winding out towards the finish line, I can only assume it was detonation, I cant hear anything with the open down pipe, so im just going on feel. But yeah just a Begi FMU, Bipes, Warlbro 190HP, and FM dual feed and their big ass stainless lines.
I think im done racing for this year, might go to the track once more but they close next month anyways. EMS over the winter, next years goal is 11.999 |
same here how are using stock injectors..anyways nice times... when i first drag the miata the shifting took getting used to since i was used to driving hondas. but i got it now i never miss shift anymore.. my favorite miss shift was 2nd to 5th :)
|
Originally Posted by ApexOnYou
(Post 168816)
Mark |
1.882 60' on street tires, Falkens , right? you're f'n killing me :vash:
|
That megan chick is hot :rofl: I like the miata protection device you guys stuck the sentra in as well :D
|
1.8 60 ft <3
what clutch/flywheel are you using? |
Nice times :bigtu:
|
damn you are FU*Ken FAST!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
|
Originally Posted by magnamx-5
(Post 170631)
That megan chick is hot :rofl: I like the miata protection device you guys stuck the sentra in as well :D
Originally Posted by Mymiataflys
(Post 170626)
1.882 60' on street tires, Falkens , right? you're f'n killing me :vash:
Originally Posted by PaKMaN
(Post 170737)
1.8 60 ft <3
what clutch/flywheel are you using? |
So I myself thought that 12s was odd for 10psi.. Well...
About two weeks ago, I switched my old style Z series boost gauge for a new style Z series boost gauge that my friend used previously. At first it was accurate, and at idle I had 22"vac like I did with my previous boost gauge.. Well, the day I ran the 12, I noticed that my boost was down to 8 or 9 psi, and I thought my friends were fucking with me again (they think its funny and yes they have fucked with my MBC before.. idiots). I turned it back up to 10psi @ the gauge, and ended up running the 12.7. I noticed last week that my vac at idle was 24"vac, then 26"vac, then last night up at the highway it was 28" of vac. I shut the car off, and to my suprise, with the engine off the needle is sitting at 2"vac, two ticks down from 0.. Meaning that I was at 12psi the day I ran the 12. (assuming that it is two ticks short of being accurate, so 10psi @ the gauge would have actually been 12psi @ the manifold). Oops! Cant believe I let that one slip by me.. |
i wish i had 93 oct...california sucks with their 91 and smog!!!...my goal is to hit that 12 sec. next season with the ems and bigger injectors...but suspension work also needs to be done too!!!...nice time for low budget project!!!:bigtu:
|
damn it boy nice 60' time. I'm jelious. What size Azenis tires are you running?
|
Thanks guys, the azenis are 195/60/14. I have quite a bit of negative camber in the rear (-2.5*), I think that helps alot when the rear squats alittle and it goes more towards neutral.
|
All times are GMT -4. The time now is 11:27 AM. |
© 2024 MH Sub I, LLC dba Internet Brands