Dyno Time and $$
 

How much do you pay for dyno time and how many pulls ? Tunning b/t pulls ?

-Local shop here is qoutin 100/hr with tuning allowed or 80 / 3pulls /1hr w/o tuning (this is for a dynojet).

$100/hr sounds good--not a steal, but not a rip either. Make sure you get telemety and an operator for that price.

I think I paid $125/hr to tune on a steady state dyno, all inclusive.

My local mustang dyno charges 100$ an hour if you get 3-4 people on a sat. You could get a group rate of like 70$ etc. If i where you i would see about getting in on the Virginia dyno braineack is putting together.
https://www.miataturbo.net/announcement.php?f=14

$150/hr for rental, $150/hr for us to tune. $50 for 3 pulls, $75 for 3 pulls with WB.

So you get $300/hr to tune a car? :eek:

No....$150/hr for us to tune or $150/hr to use the dyno for you to tune.

Gotchya, you meant $150/hour which includes a tuner if needed.

100 an hour and they tune it for me.

$100 an hour, $150 if you need a tuner. I don't know if the $100 assumes an operator; I sure as hell wouldn't let some Joe Schmoe off the street jump on my dyno and try to operate it himself.

How much is DIY charging for tuning MSPNP'd Miatas?

100 an hour for my guy also

We're $159.99/hour for dyno usage with or without a tuner ;)

Siegel

Poor locals, you should at least make a cheaper no-tuner provided option.

Typical price in Chicago land is 100/hr. 75 for a few pulls. Dyno days get down to like 40 bucks for a couple pulls.

Full day rental prices can drop the hourly rate down to 70 or so. (split amongst a few people and its :) )

good prices, i wish there was someone near Panama City.

I paid $125 for a 3 pull base line and 3 pulls after I put on the kit. Pretty Good deal

make sure where ever you dyno your car that they have a wide band o2

Local rates for a DynoDynamics load cell dyno

Baseline Dyno Test (3 runs with A/F logging): $85
Dyno Rental: $100 an hour
Dyno Tuning: $150 an hour by our expert tuners

Negotiable rates for full days and car club dyno days. They also have fixed prices for tunes on select engine management systems. Usually $300 to $650 depending on the system, additional maps (race gas, nitrous, e-85 whatever) about $100 each. Nothing Miata specific, they are mainly and Evo, STI, Mustang shop.

150/hr is overpriced for tuning on a dynojet. at most you'd want to set up your autotune for fuel and do three baseline runs and let the car tune itself. saves you $50 and with good autotune settings, nets you a perfect fuel curve.

125-150 / hr for tuning servies on a steady state dyno is pretty much the going rate around here.

http://classicgtmotorsports.com/Dyno.html

There is a place local to me that wants $100/hr for me to tune on a AWD Mustang Dyno

Its like...160 or so if they tune it and he doesn't know the software...so it'd be me, with a friend of mine helping me out. That sound fair?

There are a lot of NC guys on this forum. Put out the word, maybe you can get a couple dudes to go in with you... makes for a great day! I'd also make sure the shop has exprerience with eXede... or have them go over the software before you put the car on the dyno.

The clock starts when the straps go on. Any tinkering after that and you're paying for it.

Where exactly are you in NC?

shit, the local shop here said "$250 flat rate for stuff we know". But since they don't know MS it's $400 +$150/hr with a 4 hour minimum! Fuckers want minimum $1,000 to tune, so I told them where to put their price and street tuned it myself.

Prices down here jumped from $150 with a tuner to $180 with a tuner per hour. Some of the guys are pretty flexible on the amount of time they charge for. I spent 4 hours at a dyno last year and the guy only charged me for 2, he had a lot of stuff going on in the shop and didn't know the software really well.

some places offer dyno time for as low as 60$ for 4 pulls, just need to wait for the promotions.

We charge $100/hr and will help with your tune. Plus, like the other guys,
we'll work with you if it's gonna take several hours or you have a group. We have a Mustang dyno.

I had a group of 15 RX7's up here with a tuner from Dallas - he was charging $350 per car, on top of ~ $70/hr for the dyno. He also did about 1 to 1 1/2 hours on the street.

Hey Chicago area guys
 

Where do you go in the Chicago area for just a few pulls and how much does it cost?

Daryl

$100hr for 3 pulls / No tuning
$160hr for 1-4 hours including tuning
$135hr for 5-8 hours including tuning

When I brought my Miata I got there at opening (8am) and left around noon. They gave me a deal seeing I did most of the tuning and the fact that the owner and his kid really liked me. I even went back later that day to fool with the numbers and it was free of charge. Was worth every penny to me. :)

Vash-