My dyno readout
 

So never thought to post this up cus I forgot I had it. Let me know what you guys think. One of my friends said he talked to the guy who tunned my car and wasn't impressed with his knowledge so I hope everything looks ok. 2860RS, 440 RC injectors, MSPNP: 9697, s4 kit from bell with the middle sized intercooler
http://photos-h.ak.fbcdn.net/hphotos..._1382520_n.jpg

no MBC on your wastegate line is there? or .86 A/R?

moved to dyno section.

How much boost? Could post a log too showing AFRs, around 4500 looks a bit lean.

I hope thats not higher than 13 psi on the 2860....

His sig says 10psi, and IMO 12's are a little lean for my liking

AFR's are kinda a fail, they look sloppy, plus it looks like the out of boost is super rich

Why do you say no MBC? Something indicative of such on the graph?

.60 a/r and boost is controled by turning a nut on the wastegate arm. hope thats what you wanted.

It's impossible to understand the intricacies that make up the though process of a braineack.

I suppose that the MBC comment is about the slowly steadily rising torque. Mayhaps indicative of a slowly opening wg.

I would work on the fuel map a little.

Looks like you hit nearly 13:1 ! AFR right as you come into max torque range. This won't help the big number, but may help keep from ventilating block.

Spark map must be pretty aggressive though...looks like great numbers for 10psi. BEGi S4 ftw.

HA! And you guys question me. :brain: Don't you know how pro I am?!

And post your spark map

Moist pro. :cool:

i must ask what are your trap speeds in the 1/8

too lean.

12:1 = too lean?

I think they look sloppy but not terribly lean, the transition into boost is really terrible

12:1 is too lean IMO, at least the Tq curve looks smooth