99 with M45 delete add MS3 and a 6 speed :)
08-19-2014, 06:44 PM
#1
Senior Member
Thread Starter
iTrader: (2)
Join Date: Mar 2014
Location: Meridian, Mississippi
Posts: 628
Total Cats: 44
99 with M45 delete add MS3 and a 6 speed :)
Since removing the M45 I installed a Reverent built MS3 and tuned the car myself on the street. It currently has an 01+ header, feeding into a BEGi 3" midpipe with resonator and the BEGi "quiet" 3" muffler. The car has been converted to E85 with RX8 425cc/min injectors and a Walbro 255 lph fuel pump.
I asked what a typical stock 99 makes on their dynojet and was told "around 110 WHP", so a solid 20 WHP gain over a stock 99 combined with the 6 speed and 4.3 rear diff it feels faster than it was at 164 WHP on the stock 5 speed.
First graph is just the current run.
Second graph is current run vs same car with stock exhaust and M45 at 5.5 psi.
Third graph is the first two graphs vs same car with 01+ header and M45 at around 9 psi.
Keith
I asked what a typical stock 99 makes on their dynojet and was told "around 110 WHP", so a solid 20 WHP gain over a stock 99 combined with the 6 speed and 4.3 rear diff it feels faster than it was at 164 WHP on the stock 5 speed.
First graph is just the current run.
Second graph is current run vs same car with stock exhaust and M45 at 5.5 psi.
Third graph is the first two graphs vs same car with 01+ header and M45 at around 9 psi.
Keith
Reply
0
0
08-19-2014, 06:55 PM
#2
looks really solid for what it is. congrats.
I think mine did 120 with ms, id1000's, and on e85 on VD.
So your results are pretty much exactly what I'd expect. I asked in your other thread, but I'll ask here too: how do you like the rx8 injectors with ms3? startup/idle/hot restart/driveability/etc is all good? I keep hearing people have issues with hot restart on rx8's even when AIT isn't soaked. Is yours doing that?
Can't wait for boost plots
I think mine did 120 with ms, id1000's, and on e85 on VD.
So your results are pretty much exactly what I'd expect. I asked in your other thread, but I'll ask here too: how do you like the rx8 injectors with ms3? startup/idle/hot restart/driveability/etc is all good? I keep hearing people have issues with hot restart on rx8's even when AIT isn't soaked. Is yours doing that?
Can't wait for boost plots
Reply
0
0
08-19-2014, 07:01 PM
#3
Senior Member
Thread Starter
iTrader: (2)
Join Date: Mar 2014
Location: Meridian, Mississippi
Posts: 628
Total Cats: 44
looks really solid for what it is. congrats.
I think mine did 120 with ms, id1000's, and on e85 on VD.
So your results are pretty much exactly what I'd expect. I asked in your other thread, but I'll ask here too: how do you like the rx8 injectors with ms3? startup/idle/hot restart/driveability/etc is all good? I keep hearing people have issues with hot restart on rx8's even when AIT isn't soaked. Is yours doing that?
Can't wait for boost plots
I think mine did 120 with ms, id1000's, and on e85 on VD.
So your results are pretty much exactly what I'd expect. I asked in your other thread, but I'll ask here too: how do you like the rx8 injectors with ms3? startup/idle/hot restart/driveability/etc is all good? I keep hearing people have issues with hot restart on rx8's even when AIT isn't soaked. Is yours doing that?
Can't wait for boost plots
Keith
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
Zaphod
MEGAsquirt
47
10-26-2018 11:00 PM
