Virtual Dyno results 02 JDM VVT with bolt on's
3 Attachment(s)
Attachment 181919
Things happened and I ended up having to go back to NA for a while. A friend who does lots of work with rotaries and hondas in New Jersey came down to tune another friends Altezza so I figured what the hell. The blue line is my best effort and the red is his. Experience is a hell of a thing. Mods are JDM BP6D 10.5:1CR long block JDM square top intake manifold 3" 90* intake elbow with a big ass K&N Self made 4-1 header 1 7/8" diameter, 22-24" length primaries, 2.5" collector (sacrificed an american racing long tube header from a Vette) 3" exhaust Haltech PS1000 K20 COP conversion K20 310cc injectors Attachment 181920 I need to move the IAT sensor as it heat soaks from the radiator air very quickly. That being said the shield keeps IAT's within 15* of ambient Attachment 181921 Shot of the header (and some of my new A/C system) |
What gear is this pull? What transmission?
|
RHD car too...
|
Originally Posted by yossi126
(Post 1392024)
What gear is this pull? What transmission?
|
Originally Posted by Sirnixalot
(Post 1392154)
3rd gear pull, 6 speed with a 3.9 diff. I don't think I can find enough road to do a 4th gear pull on island:giggle:
On a 6 speed, you'd need a 5th gear pull to match a 4th on a 5speed! |
were these runs done on the same day/road and are both SAE corrected for temps?
|
also, attach your tune so that we can all check it out!
|
All times are GMT -4. The time now is 09:46 PM. |
© 2024 MH Sub I, LLC dba Internet Brands