EMU + PnP harness (99)
12-02-2007, 05:16 PM
#1
Elite Member
Thread Starter
iTrader: (3)
Join Date: Dec 2004
Location: Houston
Posts: 2,914
Total Cats: 5
EMU + PnP harness (99)
OK ok i know i should just STFU and turbo the 99 and get off the fence of should I or should I not.
Here is the question especially since it seems that E manage is a hit and miss with some NB's but lets say I were to get a EMU and a PnP harness. What else would I need to buy with it. I've been going through the archives but it seems most of the information is for the EBM/G.
I would like it to be as PnP as I can get (like my old link was) so that I have cut/tap/splice nothing at all or as little as possible. I also need to have OBDII so that cuts out full standalone. (thank you Texas)
Here is the question especially since it seems that E manage is a hit and miss with some NB's but lets say I were to get a EMU and a PnP harness. What else would I need to buy with it. I've been going through the archives but it seems most of the information is for the EBM/G.
I would like it to be as PnP as I can get (like my old link was) so that I have cut/tap/splice nothing at all or as little as possible. I also need to have OBDII so that cuts out full standalone. (thank you Texas)
Reply
0
0
12-02-2007, 07:31 PM
#2
greddy pressure sensor is needed for optimal tunning, if you are not serious about getting it to run right than you can do without it too.
Wideband-> LC1 works well and is easy to install
PnP harness http://www.boomslang.us/ultimate.htm made by boomslang
you are ready to go.
Wideband-> LC1 works well and is easy to install
PnP harness http://www.boomslang.us/ultimate.htm made by boomslang
you are ready to go.
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
