EM-U Tuned/feeling great, then feels crap???
Hello
I am new here and and read some posts on your forum from time to time, and have alwayd liked being here. I hope you guys welcome me! tho I am not a Mazda Car Owner, I drive a 180SX with a Swapped RB25DET, I live in Thailand too.. My main problem I am hope you can help me with is that since I swapped my Injectors from stock 380cc to SARD 550cc setup emanage and told it running 550cc then it ran very lean, so I tried modding LAGtime in the INJ area! that helped a little. I added some fuel to the map to rich it out for idle.. as running lean, it was spitting jerking and running crappy during idle and revving.. well all that aside I started tuning it seriously, and started to be really happy with the results, I see my A/F is in my target range, some time ahead maybe an HOUR! things changed! things were LEANING out alot... after some time it was a little better.. The next day things looked okay, then things started leaning out again! so I richen the area only to relize it was rich as hell days later.. any ideas why this is happening! This is happening usually during cruse driving or accelerating from 0km/h at lite acceleration P.S. I have noticed a bug??!! sometimes changing values in Software do nothing for emanage! un plug then replug values start making effects! running latest Software & I make sure the engine is running at normal temperture b4 tuning! thanks so much for reading Shaun |
Have you turned Autotune off?
Even though your lappy may be disconnected it will still try to tune from the last set of saved values. |
check to see if an injector connector is lose.
|
i second the autotune suggestion
|
Yup Autotune, very common mistake.
|
Also - do you have a wideband that tool such as the lc1 program that can tell you its the same numbers that the emu is seeing?
|
All times are GMT -4. The time now is 07:35 PM. |
© 2024 MH Sub I, LLC dba Internet Brands