EMB: Setting injectors lower than flow rate
 

Hi,

I have a set of injectors from a turbo probe that got flow rated at 380cc (330cc on paper). Since the EMB can't support 380cc, are there any ill effect for me to set it to 330cc? Also I have an RX7 AFM, if I do set it to 380cc can should I try to adjust the spring tighter to compensate for the EMB?

Thanks,

t.t.

You may get it to work ok if they are rated at 330cc on paper but actually flow a bit more, or you may end up with a poor idle. As you know, the EMB is designed to support up to 150% larger injectors, much more than that and you may want to think about a different engine management system.

koo thanks!