miata 1.8ltr
hi there i have been going through all the emanage forum to find a fix to my problem
1> i cant get a tps signal 2> car wont rev past 2500rpm put if i connect maf back to stock is ok 3. on parameter screen i have selected bp-ze(na) but car wont start on that it will start if i change air flow meter to bp-ze(nb) but will not rev past 2500 i have installed jr supercharger too any ideas as i am stuck |
I can't really answer your question, but I'm sure someone here can if you give enough information.
You should post the details of your setup... -Emanage Blue or Ultimate -Model year of your miata -Did you wire it yourself or use a Boomslang -Etc. |
its a 95 miata
on e manage ultimate and used universal harness all sensors working ok aprt from throttle |
Check your configuration... the M1 1.8's have a variable TPS.....
Also if you have a late build 95 (95.5) you might have the RPM wire in a different place vs. what the workshop manual says...... Dave, |
All times are GMT -4. The time now is 11:52 PM. |
© 2024 MH Sub I, LLC dba Internet Brands