need advice: tuning emanage and o2 clamp
Ok, i'm almost at the point to finally play with my emanage blue and o2 clamp. currently i have installed greddy kit with intercooler, 1.8L injectors, 190 walbro, and begi afpr. currently timing is set low and its pissing me off. i will install a boost controller eventually, i just dont trust my daily driver with more hp, i just wanna turn the timing back to normal. i've never tuned an emanage so i need some advice on a map for just timing for now. and i read someone before that i will also need a map for the o2? any suggestions or files that can help? thanks in advance
|
Start off pulling one degree of timing for every pound of boost. Bite the bullet and get a pressure sensor of some kind if you don't already have one. It will make tuning much easier. You won't need a seperate map for your O2 sensor.
How much boost are you running now? |
i meant the olderguy's autotune instead of the o2 clamp. i thought the emanage retards timing per rpm? i did get get a pressure sensor and will be wiring that with the autotune. currently i'm running about 4 psi (on the stock wastegate)
|
Originally Posted by BrillntBlk92
(Post 216385)
i meant the olderguy's autotune instead of the o2 clamp. i thought the emanage retards timing per rpm? i did get get a pressure sensor and will be wiring that with the autotune. currently i'm running about 4 psi (on the stock wastegate)
If you got the Autotune from me, it will have a timing map included that works best off a pressure sensor. If I provided you one based on airflow(because you didn't have a pressure sensor) it will be safe, but not nearly as aggressive. |
What do you mean it will have a timing map included? i think at the time i ordered it i was still going through a lot of the buying purchases so i never got that map from you. if its not too much, could you please email it to me at antondavid84@hotmail.com thanks
|
All times are GMT -4. The time now is 01:38 AM. |
© 2024 MH Sub I, LLC dba Internet Brands