Timing map help on EMB with pressure sensor
I bought a Greddy Pressure that I'am going to install on my EMB so I can pull timing under boost. (now using TPS not the best way) I'am going to be running 11 -12 psi does anyone have a EMB timing map based on that boost level so I can get a idea how to set it up ?
Thanks current setup 1999 Miata 360cc GTX injectors Garrett T-25 .48/.49 (saab turbo) Emanage Blue FM 0/2 clamp current A/F 11-11.5 wot @ 70% duty cycle Base timing is 12* pulling 6* by wot on 10psi boost (no knock) |
start pulling 1 degree of timing for every PSI your running starting at 2 psi.
Then at 6000-6400 rpm add back in 1 degree per psi then at 6500+ add another 1 degree in. between 2500-3000 add in one degree per psi and again another between 2000-2500 and another at 1500-2000. its sounds a bit messy but once you have the timing map infront its easy to set up. |
All times are GMT -4. The time now is 04:54 AM. |
© 2024 MH Sub I, LLC dba Internet Brands