Wont start
 

Ok so ive started the EMU and plugged the pressure sensor into the unit under option one. Please walk me through what to do next before starting my car. I ask this because I think ive done everything but it will on turn over for a second then stall. Just like when you disconnect your MAF on a stock car. How do I begin to use the EMU.

Is the maf connected is the fuel pump staying on? More info is needed mofo.

fuel pump is on
no maf thats why I used the pressure sensor


but I just noticed that I never changed the jumper settings inside the EMU haha. So im sure that will help.

any other input?

You have a '00 car, and you've removed the MAF sensor? Have you generated an appropriate Airflow Output map for the EMU to take its place? AFM/MAF removal isn't automatic with the EMU- there's a fair bit of work to make it happen.

Let's see a log and an .EM2 file.

haha no I just pulled it off and expected it to work. I am having problems loading .gsc maps otherwise I would ask for a base no MAF map. I went to mohd and dowloaded the last update for the system. Do I have to do anythnig else to be able to read the gsc files? It only shows em2. Otherwise ill run my maf back into the system tonight.