Best injectors for obiwan link
Hi,
What injectors would best match my build? It's a 1997 miata with a FM voodoo 2 kit/ GT2560R getting an obiwan link. Looking to run about 12PSI. What injector would best suit my needs/be the "easiest" to tune: - RX8 440cc - RC550cc - Flow Force 610cc No matter what I'd be buying them rebuild/flow tested. I'd really like the flowforce but I'm not sure the link can handle them. Thanks in advance |
the 440s or 610s.
anything with RC or DW in front of the number should never be purchased. |
The RC 550s would be the easiest to tune because they are the injectors FM used when setting up the base maps.
|
I ended up with the EV610s and had some issues getting them to idle since they have different dead times than the rc550s the software was written for. The car would idle very lean and get very rich off idle. Luckily fuel injector offset (z830) is the same as injector dead zone. After a bit of tweaking the car came back in line. These injectors are pretty baller!
|
Originally Posted by Ken Hill
(Post 1321823)
The RC 550s would be the easiest to tune because they are the injectors FM used when setting up the base maps.
|
Originally Posted by eurojulien
(Post 1327302)
I ended up with the EV610s and had some issues getting them to idle since they have different dead times than the rc550s the software was written for. The car would idle very lean and get very rich off idle. Luckily fuel injector offset (z830) is the same as injector dead zone. After a bit of tweaking the car came back in line. These injectors are pretty baller!
|
All times are GMT -4. The time now is 09:21 PM. |
© 2024 MH Sub I, LLC dba Internet Brands