2.5 NC RPM tables for Innovate SCG1??
 

First post here but I'm a long time forum poster and really searched to make sure I wouldn't get hit with a "did you try the search function?" which would be totally fair.

A little background on my build:
2013 NC 6MT Miata
2.5 out of a Ford Fusion
Fab9 EFR turbo kit with lots and lots of supporting mods, tuned via Ecutek by Bryan of Fab9. Ecutek has some limitations for turbo cars but nothing awful.
Innovate SCG1 as a boost controller (no opinion about it but it came with the car so I've been running it and don't want to change it just yet if I can avoid it)

Car is pretty well tuned and dialed in. Looking to improve my boost curve so I've been messing with the innovate wg duty and gain, but just found out it's not reading the RPM values correctly so the gain is effectively worthless. I've tried every possible setting in the Innovate manual (1ppm 2ppm 4ppm etc) but it reads 0 when the car idles.

HOWEVER I just pulled my first logs from the innovate (I usually log from the ecutek) and found that an RPM value appears just before it gets into boost at about 4100rpm. Innovate has the option to upload a custom RPM table so I'm looking for any advice on whether someone has that or how I could go about building it? I'll attach the logs that collate directly with the engine RPM from the ecutek. The numbers are not exact bc the innovate logs 15 times per second and the ecutek only 4, so sometimes the collated values are off within a 5th of a second.

https://docs.google.com/spreadsheets...it?usp=sharing

Appreciate anybody's input!!!