COPS Missfiring (99% ecu issue)
 

Installed Toyota COPS (wasted wiring) on my 94 NA MS2PNP with correct dwell times and, they dont get hot but i am getting mad missfires when even slightly giving gas.

The hardware is 100% in order, swapped and checked.
Current tune:
https://cdn.discordapp.com/attachmen...87483415_n.png

Things i tried/verified:

• It runs normal with the stock wires.
• The COPS hardware is 100% in order swapped and checked.
• I tried skip pules to 1, and a higher nominal dwell but no success.
• Base timing is correct and it works with stock ignition wires.
• Rising edge doesn't work, car wont start.
• Going high is correct, with going low they get hot
• Car runs on same settings (correctly) with stock wires exept for the dwell times.