Dash Broadcasting
Hey all, trying to get a perfect tuning universal gauge (https://perfecttuning.net/en/gauge/5...sal-gauge.html) to work with my mspnp2, specifically i need it to display afr. Ive been told to look for a setting in tunerstudio called dash broadcasting but cannot find it. Any advice?
|
It's under the CAN settings somewhere. I don't have TS on this machine, but it's in there. Is everything physically wired up?
|
I had looked under can bus/ test modes but didnt see it, ill double check when i get my laptop working again
|
I am pretty sure if you go to the perfect tuning website and download their manual they have step by step instructions to get it working with megasquirt. I know a few years ago when I bought mine I followed the instructions to get it working with my MS3.
|
Originally Posted by andym
(Post 1567736)
I am pretty sure if you go to the perfect tuning website and download their manual they have step by step instructions to get it working with megasquirt. I know a few years ago when I bought mine I followed the instructions to get it working with my MS3.
|
You likely need a firmware update for the feature to be available.
|
Alright, so i reinstalled ts and now if i open an example project, the option for dash broadcasting shows up where it should be, but when i open the project for my car it goes away again.
|
Originally Posted by gooflophaze
(Post 1567744)
You likely need a firmware update for the feature to be available.
|
Originally Posted by Golcems
(Post 1567767)
Alright, so i reinstalled ts and now if i open an example project, the option for dash broadcasting shows up where it should be, but when i open the project for my car it goes away again.
You need to update your firmware. |
Yep, updated the firmware on ms and i got several error messages. Didnt have time to figure it out at the time, but now ms isnt being detected by ts...
|
Alright i got the firmware stuff figured out and dash broadcasting is now available. Still cant find a base map that works.
|
Nevermind, got it running. now i have dash broadcasting enabled but its still not showing on the gauge and i have some awesome new lifter tick
|
All times are GMT -4. The time now is 07:14 PM. |
© 2024 MH Sub I, LLC dba Internet Brands