I have searched, and couldn't find anyone's spark tables for e85. Curious what people are running out there. Just got back from the dyno and wanted to compare what i have around 15psi just to get a base line/benchmark. Don't have the tune in front of me, but i think it was about 14 at max torque and around 19 at redline for my 180kpa row on the map (in denver at 83kpa).

 

vroom vroom

 

Wow. Is that a 1.6 or 1.8? And what all are you running? Think mine is about 8-10 deg below yours. You have knock sensors/knock retard setup? Seems high, but awesome if it's running pure.

 

Just saw you sig. Now it makes sense well done!

 

Also consider compression before you use another map. Great looking table but I'd be in trouble if I ran it on a car with 11.5:1 pistons.

 

Bill, I'm down in the Springs and running a similar sounding map with e85 on my 1.6, although I'm capping my timing (in boost) above 4500 to 15*. I'm at about 17* through peak torque and letting it taper to 15* thereafter. Virtual Dyno says 250tq peak with the current map, and until I get back on a real dyno to see what it's actually making I'm playing it safe.