First impressions of BPSX D1 Wideband Controller
38 Attachment(s)
My 14point7 Spartan Lambda Controller took a dumb only after about 6 months of use. It just started reporting 14.7 no matter what, tried to switch out to a new sensor no use. Toast. I did have it mounted in the engine bay, but I didn't think that should have been an issue as it looked sealed pretty well.
I found this Ohio based company that makes a wideband controller that there is virtually no info about their products except for a few forum threads asking about it. They say it comes with lifetime warranty on the controller, I figured what the heck. It arrived today, though I was not able to hook it up yet, I have some unpacking photos. Just out of the bubble wrap envelope. Comes with not one, not two but THREE stickers. Very impressed by sticker count :rofl: https://www.miataturbo.net/attachmen...ine=1382060194 https://www.miataturbo.net/attachmen...ine=1382060194 Box unpacked, only contained instructions and a business card and business card magnet. Looks like they controller was supposed to be in there but taken out as I ordered the option with the LED screen, which comes pre wired, which is kind of nice. https://www.miataturbo.net/attachmen...ine=1382060194 Instructions: https://www.miataturbo.net/attachmen...ine=1382060194 https://www.miataturbo.net/attachmen...ine=1382060194 Close up of the controller itself: https://www.miataturbo.net/attachmen...ine=1382060194 LED screen: https://www.miataturbo.net/attachmen...ine=1382060194 https://www.miataturbo.net/attachmen...ine=1382060194 Comes with connector prewired for BOSCH sensor. Wasn't even mentioned AFAIK. Nice touch for plug and play ease: https://www.miataturbo.net/attachmen...ine=1382060194 'Murica! https://www.miataturbo.net/attachmen...ine=1382060194 https://www.miataturbo.net/attachmen...ine=1382060194 One of the casing screws was only half way in, open invitation: https://www.miataturbo.net/attachmen...ine=1382060194 Board: https://www.miataturbo.net/attachmen...ine=1382060194 https://www.miataturbo.net/attachmen...ine=1382060194 https://www.miataturbo.net/attachmen...ine=1382060194 https://www.miataturbo.net/attachmen...ine=1382060194 Close up of chips: https://www.miataturbo.net/attachmen...ine=1382060194 https://www.miataturbo.net/attachmen...ine=1382060194 https://www.miataturbo.net/attachmen...ine=1382060194 Looks to be hand soldered. I didn't notice the yellow residue on the solder joints until I looked at the pictures, I guess they didn't clean it off? The case seems to be an ABS plastic of sorts, should hold up pretty well. The build quality is OK but it could be better. I hope I won't need to use the lifetime warranty, but if I do, I hope they are not gonna be gimmicky with that. I will update once I hook up my sensor to it. |
You left out the most important part of any product review.
|
Originally Posted by sixshooter
(Post 1064482)
You left out the most important part of any product review.
|
$
|
Originally Posted by sixshooter
(Post 1064614)
$
Pretty good value if you ask me. I actually had the chance to wire it in and it seems to be working great. Setup was easy, calibration was quick and the gauge output matches the output i see in megasquirt (setup as techedge). Warmup time is not bad, I will time it soon and post some pics of installation. Overall i'm happy with the purchase so far as it works great. |
Originally Posted by sixshooter
(Post 1064482)
You left out the most important part of any product review.
|
I wonder how accurate it will be when reading with Tunerstudio. Seems like most widebands have some issues getting properly matched. I'll be watching this.
|
Originally Posted by kero
(Post 1065049)
The controller & display are 64.99 free shipping.
Pretty good value if you ask me. I actually had the chance to wire it in and it seems to be working great. Setup was easy, calibration was quick and the gauge output matches the output i see in megasquirt (setup as techedge). Warmup time is not bad, I will time it soon and post some pics of installation. Overall i'm happy with the purchase so far as it works great.
Originally Posted by dieselmiata
(Post 1065061)
I wonder how accurate it will be when reading with Tunerstudio. Seems like most widebands have some issues getting properly matched. I'll be watching this.
Is there more to it than this? |
APSX Wideband D1 Controller with G1 LED AFR Display
Originally Posted by kero
(Post 1065049)
The controller & display are 64.99 free shipping.
Pretty good value if you ask me. I actually had the chance to wire it in and it seems to be working great. Setup was easy, calibration was quick and the gauge output matches the output i see in megasquirt (setup as techedge). Warmup time is not bad, I will time it soon and post some pics of installation. Overall i'm happy with the purchase so far as it works great. |
All times are GMT -4. The time now is 03:57 PM. |
© 2024 MH Sub I, LLC dba Internet Brands