High idle
4 Attachment(s)
94 miata begi S1 kit. MSPNP . rx7 460cc.
+++++++ EDIT I found the problem. not sure what should be hooked up here though.. just capped it off++++++ Got the car tuned a few weeks ago. drove it back from Maryland to va. a few days passed and i started having a high idle issue. idles between 2000 and 2200. the car drives fine only issue is the idle. Things I have done to try and correct the problem. 1. I had a bad temp sensor. I replaced it thinking the car thought it was always cold so increased idle. really did not make sense because it was still idling higher than the cold idle setting. but I was told the sensor was bad so figured change it out. 2. i checked an reset my TPS settings. open throttle was 30 closed was 180. 3. sprayed carb cleaner all over the mother f'ing place to see if i had a vacuum leak. i found nothing. 4. checked my idle screw and verified it was screwed down all the way. 5. tap tap tapped on the area around where i believe the idle air controller is.. read a post that someone did this and fixed their issue. not sure what my next step should be. any help would be appreciated. |
4 Attachment(s)
found my problem.. but not sure what should have been hooked up to this spot?
i just plugged it off. |
That port is used by automatic transmissions. Should be plugged on manual car.
|
All times are GMT -4. The time now is 01:47 PM. |
© 2024 MH Sub I, LLC dba Internet Brands