LC-1: Strange Serial Communication Issues
The LC-1 worked like a champ for many months.
Over the past few months, it would suddenly have random serial dropouts. Just driving down the street and I'd get -.-.- on my XD-16 gauge, which means no serial communication. Now it doesn't communicate with the gauge at all, ever. I can connect to the LC1 with my laptop (native serial) with LMProgrammer. I can not connect to the LC1 with LogWorks. I have a good +12V lead on the LC1 (shared with XD). I have awesome grounding to the cyl head. The terminator plug is installed. Curious if anyone has had a similar experience, and if so, what type of resolution was experienced. |
I flashed the firmware. Right now, it's working again.
|
Stopped working within minutes
|
You might want to call Innovate on this one. Ask for Felipe and let him know I sent you.
|
The only problems ive ever had with mine were always due to usb to serial cable. Just a thought.
|
Originally Posted by Matt Cramer
(Post 477271)
You might want to call Innovate on this one. Ask for Felipe and let him know I sent you.
Originally Posted by Tw34k
(Post 479795)
The only problems ive ever had with mine were always due to usb to serial cable. Just a thought.
Problems exist between the XD gauge and LC controller, which has nothing to do with my computer anyway. |
Props to the fine folks at Innovate, namely Felipe, who took care of me by sending me a replacement LC-1.
|
All times are GMT -4. The time now is 03:50 AM. |
© 2024 MH Sub I, LLC dba Internet Brands