Looking for a cheap ECU that'll suit my needs
Running a 1.8, and planning on a T28 and running about 7-8psi of boost.
I don't have much money to spend after I get all of this set up, can someone recommend me an ECU that will suit these needs? |
Oh boy....:facepalm:
|
|
Originally Posted by levnubhin
(Post 472123)
Define cheap.
|
only thing at that price that would be well recommended here is to build your own megasquirt. the end.
|
I'm looking for a nice place to get a happy ending massage for cheap. Preferably under $30.
|
Originally Posted by neogenesis2004
(Post 472176)
I'm looking for a nice place to get a happy ending massage for cheap. Preferably under $30.
|
MS is best for the money.
|
Originally Posted by 18psi
(Post 472187)
MS is best for the money.
|
Originally Posted by rider384
(Post 472184)
Check your local streetcorner; though I should warn you that 30 bucks will get you an uneventful release and a couple of odd lumps.
|
Originally Posted by rider384
(Post 472191)
Thanks man, plug n play? Or is it a build your own?
Total you're looking at about $260, but you'll need to assemble it. Hope you know how to solder. Press "user CP" in the upper left hand corner of the forum, and add your location to your profile, maybe someone in your area will build it for a small fee. But above all, start searching, MegaSquirt is a very well covered topic on this forum. |
Originally Posted by neogenesis2004
(Post 472194)
I said a nice place. Looks like I just want it all huh. Cheap, good, easy...
|
Next question... Will it install and tune itself?? or do I have to touch the damn thing??
Dude get a MS if you CANT really afford to buy one built, then built your own. MS are relatively plug-n-play, emphasis on relatively, however small mods and tuning is required. Shit just doesnt fall in your car and work. |
Thanks guys, though I don't think you really understood when I said "plug n' play".
Of course you have to tune it, and install it. I was simply wondering if there is any wire splicing or major modifications to the electrical system necessary. |
Im selling my emanage. You had to have surely heard of those. $400 shipped with ignition, fuel, and main harness. Also including my 12psi tune from it and tuning cable as well as the disc
|
Originally Posted by curly
(Post 472242)
DIYAutoTune.com Megasquirt Kits / Assembled Engine Management Systems, Wideband o2 Sensor Systems and tuning products
Total you're looking at about $260, but you'll need to assemble it. Hope you know how to solder. Press "user CP" in the upper left hand corner of the forum, and add your location to your profile, maybe someone in your area will build it for a small fee. But above all, start searching, MegaSquirt is a very well covered topic on this forum. What's the difference between version 2.2 and version 3.0? Does it include instructions for the 1.6 and 1.8? (I have 1.6) WHat else will I need besides the kit that's either $139 or $187? |
Motec M800.
|
Originally Posted by spd579
(Post 487688)
So a few questions for MS for whomever wants to answer on this site:
What's the difference between version 2.2 and version 3.0? Does it include instructions for the 1.6 and 1.8? (I have 1.6) WHat else will I need besides the kit that's either $139 or $187? MegaSquirt Forums and here: DIYAutoTune.com Megasquirt Kits / Assembled Engine Management Systems, Wideband o2 Sensor Systems and tuning products You're going to have difficulty getting full answers to your questions because answers to your questions are easily available if you look around a bit. Ken |
Originally Posted by rider384
(Post 472618)
Thanks guys, though I don't think you really understood when I said "plug n' play".
Of course you have to tune it, and install it. I was simply wondering if there is any wire splicing or major modifications to the electrical system necessary. That means you'll likely have do a lot of your own wiring. Ken |
Originally Posted by spd579
(Post 487688)
So a few questions for MS for whomever wants to answer on this site:
What's the difference between version 2.2 and version 3.0? Does it include instructions for the 1.6 and 1.8? (I have 1.6) WHat else will I need besides the kit that's either $139 or $187? I THINK that's it. As everyone else has said SEARCH! There are some great sticky threads in the Megasquirt section of this forum. After buying all the above, you'll need to solder it together, drill and tap your intake for the AIT sensor and wire it to your car's AFM plug, run a vacuum line to the MS, solder together a PNP harness or solder directly into your car's ECU harness, and then the rest is software. Again, ALL THESE QUESTIONS ARE ANSWERED IN THE MS STICKYS! |
All times are GMT -4. The time now is 08:51 PM. |
© 2024 MH Sub I, LLC dba Internet Brands