MS3x RPM drops then raises when on gas
 

Good evening guys, I just got my MS3x installed in my 1.6 miata. I got the ignition timing configured so the nudge is on the 10, disconnected the TPS, and got the correct fuse disconnected. Car turns on fine and idles fine, but when I hit on the gas fast it will drop from ~800 rpms to about 400 then shoot back up normal. If I let the on the gas slowly the rpm drop is almost none.

Also sometimes I will turn the car on and it will idle at 100-400rpms until I slam the gas down, rev the car up, then let back off (assuming this process doesn't kill the car).

Any help would be greatly appreciated. I tried to include my current tune but the upload wouldn't work. I'll try again later

Turned the car on to drive home and at idle it will nit fluctuation from 200-400 rpns constantly. If I accelerate extremely slow I can not cut off but this is a challenge driving. I'm currently on the highway using voice to text and its driving without problem at high speeds. I haven't gotten any RPM drop. Any ideas?

Can you post a data log of these issues and your MSQ?

<a href=http://www.filedropper.com/ms3x><img src=http://www.filedropper.com/download_button.png width=127 height=145 border=0/></a><br /><div style=font-size:9px;font-family:Arial, Helvetica, sans-serif;width:127px;font-color:#44a854;> <a href=http://www.filedropper.com >upload files online</a></div>


I keep trying to attach the files but it doesn't work. That's the download link, hopefully it works.