Need the XEDE Timing Pattern File
 

Anyone have this thing? I sent an email to bell engineering but I'm curious if anyone has the pattern file laying around they could email to me. Standard 99-00 NB XEDE, have my map but apparently don't have the pattern file. :(

Thanks in advance.

Alright for anyone who searches for this in the future I'm going to upload the XEDE data I have in case they can't find it anywhere else.

NB Timing signal (this file will work on any non-MSM NB)

http://www.mediafire.com/?5brorcdi1liqyyb

Stock Injector basemap for XEDE for NB, used for initial testing, stock injectors cannot supply enough fuel for any reasonable amount of boost.

http://www.mediafire.com/?412h4hhs9c0hjsw

If you move up injector sizes, you can use the above map as a baseline by changing the first scaling value in your XEDE (read the XEDE pdf to see how to do this). My Deatsch Werks 440cc Injectors need a scaling value changed from 1.0 (stock injectors) to .943 (440cc's).

440cc, MSM turbo, 10psi map. Tuned to ~12:1AFR. Will work fine as a base map on wastegate pressure.

http://www.mediafire.com/?bqowbmi5qjwebf2

Thanks for the post

Apparently I can no longer edit my posts, so I must bump this.

440cc, MSM turbo, 10psi, revised map. Should increase highway MPG (~14.7 AFR at cruise) and runs a bit richer under boost (under 12:1 AFR everywhere during load).

http://www.mediafire.com/file/r3m9wp...psi%20MAP2.X32