Bought four tiny lights with leads and tried the test mode today.
When in batch injection: "inj1" powered injectors 1 and 4 "inj2" powered injectors 2 and 3 When in sequential: "inj1" = injector 1 "inj2" = injector 3 "inj3" = injector 4 "inj4" = injector 2 Everything seemed to work as supposed to. One thing i noticed is that the rewiring messed up my VE-table tune a bit and made the idle a bit rough and shaky. |
idle should be smoother!
|
Yeah.. What i meant was that i did the rewiring but i still have to run the car in batch injection since it wont start / run in sequential. And when running in batch, it seems to be a bit rougher than it used to.
At first i did fuck up by wiring it so that one of the injectors was getting two signals and one didnt get any (which was obvious as the car started coughing booze out of the exhaust). However, i dont see how this could have caused any damage to the engine that would explain any strange behaviour. |
I just wanted to let you guys know that I'm trying to run EV1 550s on batch fire in my 11.5:1 compression engine. Shit is retarded. I might as well have hose-barbs for injectors.
|
would stock injectors max out on your all motor setup?
IDK why you would run such big injectors for something like your setup. |
Originally Posted by shlammed
(Post 929513)
would stock injectors max out on your all motor setup?
IDK why you would run such big injectors for something like your setup. |
Alright chaps, i got the car running in sequential! The solution was embarrassingly simple: For some reason i had to change my req-fuel from 6.4 to 17.0! Now it seems to be running smoothly at desired AFR even though my injector pulse widths seem to be roughly twice as long as they were in semi-sequential. Judging from the smell there's no unburnt fuel so the AFR readings seem fine to me. I'm running 2 squirts per cycle alternating, although I'm not sure if it makes any difference in this case..
|
Originally Posted by [Ode]
(Post 929799)
Alright chaps, i got the car running in sequential! The solution was embarrassingly simple: For some reason i had to change my req-fuel from 6.4 to 17.0! Now it seems to be running smoothly at desired AFR even though my injector pulse widths seem to be roughly twice as long as they were in semi-sequential. Judging from the smell there's no unburnt fuel so the AFR readings seem fine to me. I'm running 2 squirts per cycle alternating, although I'm not sure if it makes any difference in this case..
|
4 Attachment(s)
Do these settings look right for:
EV14: https://www.miataturbo.net/attachmen...1&d=1354394913 EV6: https://www.miataturbo.net/attachmen...1&d=1354394913 |
Correct your bank 3 and bank 4 battery voltage correction.
|
Originally Posted by Reverant
(Post 955099)
Correct your bank 3 and bank 4 battery voltage correction.
|
All times are GMT -4. The time now is 04:31 PM. |
© 2024 MH Sub I, LLC dba Internet Brands