huesmann

iTrader: (1)

Go get yourself a Kia vTPS and get a 3D printed adapter.

yukiviolet

I'm game for that, do you know where I can get an adapter?
​​​​​​

lsdlsd88

any 3d printing shop? got mine done for 15$ in 1 hour

https://www.miataturbo.net/megasquir...2/#post1426457

lsdlsd88

whats going on with the map sensor? when the engine stalls it goes straight to 48kpa and stays there. it should go at 100!

huesmann

iTrader: (1)

PMed you with adapter info.

yukiviolet

Thanks I do appreciate that.

yukiviolet

Interesting I didn't notice, I had the valcume line ran to my intake manifold. I'm sending my unit in do to a issue that my car wasn't powering down when the key was turned so I will ask if they can look into that for me as well.

lsdlsd88

AusMiata

Does any one have the .stl for the kia adaptor?

Thanks

lsdlsd88

AusMiata

Link doesnt work?

lsdlsd88

AusMiata

Ok thanks lsdlsd88

AusMiata

Ok thanks lsdlsd88 greatly appreciated.

AusMiata

Thanks. Should help out future na6 modders too

huesmann

iTrader: (1)

I think the link originally disappeared because places were 3D printing Sean's design and selling the part without permission, SADfab logo included.

lsdlsd88

What is Thingiverse?

MakerBot's Thingiverse is a thriving design community for discovering, making, and sharing 3D printable things. As the world's largest 3D printing community, we believe that everyone should be encouraged to create and remix 3D things, no matter their technical expertise or previous experience. In the spirit of maintaining an open platform, all designs are encouraged to be licensed under a Creative Commons license, meaning that anyone can use or alter any design.

lsdlsd88

I would imagine having your logo printed and shared can only bring you new customers? what was the point of uploading the stl in the first place then..

noisymime

Creative Commons licenses come in multiple flavours, including By Attribution and Non-Commercial terms. If these were licensed under say the CC-BY-NC license, it means people are free to use and share the design, but MUST provide attribution back to the original and MUST NOT use the design commercially. I'm not sure what license was used for this design, but being Creative Commons licensed is far from the same as being public domain.

aidandj

iTrader: (5)

The bracket was being printed and sold. Directly competing with the original creators sales.