Miata Turbo Forum - Boost cars, acquire cats. - Tanabe wideband with stock ecu?

Miata Turbo Forum - Boost cars, acquire cats. (https://www.miataturbo.net/)

- ECUs and Tuning (https://www.miataturbo.net/ecus-tuning-54/)

- - Tanabe wideband with stock ecu? (https://www.miataturbo.net/ecus-tuning-54/tanabe-wideband-stock-ecu-85718/)

Trevor Harp

08-29-2015 09:12 PM

Tanabe wideband with stock ecu?

Just bought a tanabe wideband and afr gauge, and was wondering if it will work with the stock ecu. I know some widebands can be used with stock ecu but cant find anything about tanabe. Thanks in advance.

concealer404

08-30-2015 03:43 PM

All widebands can be used with the stock ECU. Not all can feed the stock ecu.

Does your wideband have a narrowband simulated output?

Trevor Harp

08-30-2015 06:14 PM

Quote:

Originally Posted by concealer404 (Post 1261789)

All widebands can be used with the stock ECU. Not all can feed the stock ecu.

Does your wideband have a narrowband simulated output?

Im not sure, that's what I'm trying to find out

sparkybean

08-31-2015 06:28 AM

I have an LC2, which has configurable outputs. This means you can feed a stock ECU by simulating a stock narrowband. I had mine set up so 14:1 = 1.1v and 15:1 = 0.1v. See if yours has a programmable output on it.

concealer404

08-31-2015 10:16 AM

Quote:

Originally Posted by Trevor Harp (Post 1261800)

Im not sure, that's what I'm trying to find out

I think you're going to have a hard time with that. I hadn't even heard of this wideband before this thread. Nobody here uses one.

I'd suggest selling it to someone that values jdm y0 over support and function and get an MTX-L if you really need narrowband simulation.

All times are GMT -4. The time now is 04:27 AM.