Haltech E6K
#1
Haltech E6K
looking ofr anyone who knows of a good map or someone who know's how to tune this setup.
Haltech E6k running:
1.8 miata
Head has Web cams and solid lifters.
550cc RX7 injectors
T28 Garrett with A/R .80 coldside.
and an HKS intercooler.
setup was originally in a Mazda Protege, and put together by Corksport, but I want to try to get this together myself, and learn in the process.
Thanks, I searched just didn't find many similar cases, and wanted to find someone using this right now...
Haltech E6k running:
1.8 miata
Head has Web cams and solid lifters.
550cc RX7 injectors
T28 Garrett with A/R .80 coldside.
and an HKS intercooler.
setup was originally in a Mazda Protege, and put together by Corksport, but I want to try to get this together myself, and learn in the process.
Thanks, I searched just didn't find many similar cases, and wanted to find someone using this right now...
#9
My point being that you're basically analyzing a datalog, making map adjustments, uploading/saving and then datalogging again. I looked at the Halwin DOS software and it's not much more crude that what I use for the LINK. Most recent laptops will boot to a thumbdrive- dos and the halwin app would easily fit there.
#10
to bad I couldn't run this off a PALM or other handheld... that would actually be kind of cool.
I think I am going to throw in the towel on this, and go with the majority to MS.
who's a good source that gives back to the forum for a MS system? MSPNP?
I figure I can get $500-700 out of the Haltech E6k so I would be able to spend something around that if I need to.
I think I am going to throw in the towel on this, and go with the majority to MS.
who's a good source that gives back to the forum for a MS system? MSPNP?
I figure I can get $500-700 out of the Haltech E6k so I would be able to spend something around that if I need to.
#12
ok, jerked this off the RX7 club.
using one of the Dos simulators specifically Dosbox,
and one of these adaptors for a serial port:
keyspan serial adaptor (USB)
PCMCIA adapter (Card)
with this you can run it with a Vista and XP based laptop and still be ok...
I may keep it and give it a shot... that is if if doesn't sell... I may use the money from it if it sales to fund a forged bottom end then put off getting the turbo and engine management installed 'till some time at a later date.
using one of the Dos simulators specifically Dosbox,
and one of these adaptors for a serial port:
keyspan serial adaptor (USB)
PCMCIA adapter (Card)
with this you can run it with a Vista and XP based laptop and still be ok...
I may keep it and give it a shot... that is if if doesn't sell... I may use the money from it if it sales to fund a forged bottom end then put off getting the turbo and engine management installed 'till some time at a later date.
Last edited by codeman583; 01-30-2010 at 12:06 AM.
Thread
Thread Starter
Forum
Replies
Last Post
sickmiatabra
MEGAsquirt
6
09-17-2018 03:42 PM
sickmiatabra
ECUs and Tuning
14
08-04-2015 11:58 PM
da chop
Miata parts for sale/trade
44
07-29-2011 09:29 AM