Vehicle speed settings megasquirt
 

trying to get megasquirt to see my vehicle speed, I have an ms3x built by brain in a 92 with cruise control. Pulled the gauge cluster out, tied into the Green/Red wire which correlated to the F terminal on the back of the gauge which goes to the RSW screw. Then I ran the wire to the ECU where I tied it into pin 29 on my top connector based on what Brain told me which is the "Nitrous In". I believe I have everything connected correctly but I am not seeing any speed on the tunerstudio dash when I add a Vehicle Speed 1 gauge. Below is a screen shot of the settings I have, not sure if these are correct or not, I could use some help, thanks.