Wiring Apexi Avc-R to 90-93
1 Attachment(s)
Hello, I was wondering if anyone else tapped wires from an APEXI-AVC-R onto their ecu harness for their 90-93 miata's. From looking at the wiring diagram I found from Google, I came up with what I can:
-Red (IG POWER) BLUE/RED 1A (Connection 1) -Purple (rpm signal & injector signal) 2I - BLACK/WHITE (Connection 2) -Green (ground wire) - BLACK -Black (ground wire) both must be on same circuit - BLACK (Connection 2) -Gray (throttle signal) Yellow/black or Yellow (Connection 2)2U or 2V -White (speed signal) - BLACK/RED 1M Please verify this someone. Thank you. From the manual: https://www.miataturbo.net/attachmen...ine=1417380924 For our wiring/ecupin out: http://www.miata.net/garage/ECU_Pin-Out.png |
All times are GMT -4. The time now is 04:41 PM. |
© 2024 MH Sub I, LLC dba Internet Brands