|
00 block and head with 05 head gasket ?!?
Juste had one engine rebuilt And the builder installed an 05 felpro gasket kit.
The valves tick way too much And after verification there s almost no Oil for the cam... Does the gasket kit block that many ports? I read coolant ports were diffèrent but no idea on oil... |
It's possible he installed the gasket upside down, which blocks the oiling port for the head.
You also can't use an 01+ head gasket in a 94-00 motor, because it blocks the majority of the coolant ports between the block and the head. Your engine builder should fix this on his dime while you watch. |
Tomorrow morning. Damn it broke exh cam keyway and bolt. Journals are not great either. Shit!
|
Yeah that 05 gasket is fucking up the coolant flow badly.
|
YEah we saw that, wrong head gasket block many coolant holes. Thing is, oil passage is at the same place and no oil came into the head... had pressure on stock sensor, but head ran dry and seized up one cap on exh cam. (picture to come)
You can't place the gasket upside down as the dowel pin (rivet on gasket) don't let you do it and don't cover one of water hole. Doing so will splash everywhere without engine running. Builder will redo another head with a spare I had.. but why no oil ?!? Air went through and everything was fine, even sensor hole to oil pass in the block was ok |
Did you check both, in and out oil passage?
|
I don't understand the question... We checked the block passage and we did shoot some air below the head and checked every hole on top of the head.
I also order an BE oil pump gear set for the new engine, cheap insurance. |
Originally Posted by joyrider
(Post 1048486)
YEah we saw that, wrong head gasket block many coolant holes. Thing is, oil passage is at the same place and no oil came into the head... had pressure on stock sensor, but head ran dry and seized up one cap on exh cam. (picture to come)
You can't place the gasket upside down as the dowel pin (rivet on gasket) don't let you do it and don't cover one of water hole. Doing so will splash everywhere without engine running. Builder will redo another head with a spare I had.. but why no oil ?!? Air went through and everything was fine, even sensor hole to oil pass in the block was ok |
Well yes, French school tho....
+ cell phone text corrector = that *language* |
Originally Posted by joyrider
(Post 1049371)
Well yes, French school tho....
+ cell phone text corrector = that *language* |
1 Attachment(s)
https://www.miataturbo.net/attachmen...ine=1378006554
Originally Posted by hustler
(Post 1049378)
Alright, you get a pass.
|
Well I'm from Quebec, but that's okay I guess ! Can we get back on subject now ?
|
6 Attachment(s)
Sorry for the late pictures but here they are :
Felpro 05 gasket on 00 block (tried it upside down too) https://www.miataturbo.net/attachmen...ine=1378434298 https://www.miataturbo.net/attachmen...ine=1378434298 Damage of the head and cam https://www.miataturbo.net/attachmen...ine=1378434298 https://www.miataturbo.net/attachmen...ine=1378434298 15 minutes of idle tweaking https://www.miataturbo.net/attachmen...ine=1378434298 https://www.miataturbo.net/attachmen...ine=1378434298 No oil, no love...... |
Head was rebuilt from a specialized machine shop.. pictures tomorrow when I'll pick it up
|
| All times are GMT -4. The time now is 08:16 PM. |
© 2024 MH Sub I, LLC dba Internet Brands