Im fitting solid shim under bucket lifters to my '92 1.6 engine. I just wondered what the valve clearances should be?

I did find the clearance specs for an NB 1.8 engine, would these be suitable for my 1.6?

IN: 0.18—0.24 mm {0.008—0.009 in}
(0.21±0.03 mm {0.008±0.0012 in})
EX: 0.28—0.34 mm {0.012—0.013 in}
(0.31±0.03 mm {0.012±0.0012 in})

If not, could someone point me in the right direction for the specs?

Thanks
Mike

 

More info on how you are fitting solid lifters to a 1.6? stock b6 head?

 

I've got a set of MMD shim under bucket lifters to replace the standard hlas