300+ Whp build.....
I am getting ready to yank my stock motor and install one with forged internals. My goal of 300+whp seems realistic. Here is how I see it coming together. Input welcome
Supertech 9.5:1 or 10:1 Pistons M tuned rods Boundry pump ATI damper Shaved .060 and ported 99 head with +1mm valves BP5a Intake cam and stock exhaust cam Supertech single springs Rotrex C30-74 E85, MSPNP and ID1000's Honda skunk2 intake With the ATI the blower will redline at 7,950. Based on all my fuzzy math over 300whp is possible. |
Based on your attention to detail and quality of work in your car I can only see glory coming from this thread.
|
If you're running E85 why not go with 10.5:1 or 11:1 unless you are attempting to be able to run pump gas if absolutely necessary.
|
10:1 + .060 shave = way more than 10:1
|
I missed the shaved part in the original post... carry on
|
Exciting. I shall be watching with great interest.
|
All times are GMT -4. The time now is 10:07 PM. |
© 2024 MH Sub I, LLC dba Internet Brands