460cc injectors, pnp adaptors
 

I have 460cc red tops, 195500-1350 which i was told were high ohm and the DW report that came with them shows 12.5 ohms. I want them to pnp and not have to cut the harness. Where can i get clips/adaptors to make them pnp on the stock nb harness? I saw the fm clips but those are expensive.

yeah those are the ones I was thinking of. Unless you can find their source, that's about the only PNP option.

You can buy just the clips for the injector and then piggyback them into your harness so you have two connectors for each, one in stock and the GM square type.

the injectors i bought came with 8 pig tails, i jsut have to shave off a part on the injector for them to fit.

Sell them on ebay and buy some RX8 440's that are PnP.

http://osidetiger.com/EV1pigtails.aspx

ordered mine from there. fast shipping and they looked great. prices werent too bad either

you have the same off center clip? how did u get that part off? did u cut it then sand it?

You are looking for Denso to EV1 connector adapters on that same osidetiger page.