BP head porting intel from the pros
#22
Elite Member
iTrader: (37)
Join Date: Apr 2010
Location: Very NorCal
Posts: 10,441
Total Cats: 1,899
One thing that became very apparent is that if you don't know what you're doing when porting, it's easy to end up worse off than if you left it stock. I'm all for DIY and experimentation (have you seen my lemons car?). But head work is like valving shocks - best left to the pros, in my opinion.
EO2K, Keegan will work to the customer's budget and needs, suggest dropping them a line - 562.301.3277, info@keeganengineering.com. Mike's super friendly.
EO2K, Keegan will work to the customer's budget and needs, suggest dropping them a line - 562.301.3277, info@keeganengineering.com. Mike's super friendly.
Did the boys over at KE touch anything on the intake manifold? Port match or anything?
#24
Elite Member
iTrader: (16)
Join Date: Oct 2006
Location: Las Cruces, NM
Posts: 1,647
Total Cats: 524
Thanks for posting this! I did some of these mods (round off straight edges in combustion chamber, valve port ridge removal and remove machined edges by valves in combustion chamber). I'm glad to see they are justified.
#28
That we seem to be able to tune the Miatas handling for a given track, conditions and race strategy better than anyone else may be a contributing factor
Just the same, Mike Keegan has proven amenable to experimentation and communicates with us very well. We kick ideas around for various projects.
It goes something like this:
Me:
"Hey Mike, I want to try these nine hare brained ideas."
Mike:
Yeah, um three of those will make power in a Miata engine."
Me:
"Make it so."
Just the same, Mike Keegan has proven amenable to experimentation and communicates with us very well. We kick ideas around for various projects.
It goes something like this:
Me:
"Hey Mike, I want to try these nine hare brained ideas."
Mike:
Yeah, um three of those will make power in a Miata engine."
Me:
"Make it so."
__________________
#29
Tour de Franzia
iTrader: (6)
Join Date: Jun 2006
Location: Republic of Dallas
Posts: 29,085
Total Cats: 375
That we seem to be able to tune the Miatas handling for a given track, conditions and race strategy better than anyone else may be a contributing factor
Just the same, Mike Keegan has proven amenable to experimentation and communicates with us very well. We kick ideas around for various projects.
It goes something like this:
Me:
"Hey Mike, I want to try these nine hare brained ideas."
Mike:
Yeah, um three of those will make power in a Miata engine."
Me:
"Make it so."
Just the same, Mike Keegan has proven amenable to experimentation and communicates with us very well. We kick ideas around for various projects.
It goes something like this:
Me:
"Hey Mike, I want to try these nine hare brained ideas."
Mike:
Yeah, um three of those will make power in a Miata engine."
Me:
"Make it so."
#32
Boost Czar
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,493
Total Cats: 4,080
I almost moved to TX to work at BEGi. and by almost, I talked to Corky, and looked at how much plane tickets would cost to fly me and my wife out over a random weekend last summer.
acutally, if they were closer to austin over sa, it probably would of happened, but there was nothing for my wife in SA, but lots of crap in austin.
acutally, if they were closer to austin over sa, it probably would of happened, but there was nothing for my wife in SA, but lots of crap in austin.
#36
Moderator
iTrader: (12)
Join Date: Nov 2008
Location: Tampa, Florida
Posts: 20,651
Total Cats: 3,011
You don't need to be. Most of the shop owners I know pay the guys who do the design or fabrication work and don't do it themselves. Much of it is proper marketing. There are local shops that make lots of money doing mediocre or poor work because of good marketing. Their shops are full. Some of the best fab and design shops close because of poor management or marketing, not because the work is shoddy or the designs are ineffective.
Long story short, I would likely put a "Hustler Racing" decal on my car even if all you made was decals. If it was an attractive decal...
Long story short, I would likely put a "Hustler Racing" decal on my car even if all you made was decals. If it was an attractive decal...
#37
Latest installment details the Supertech valvetrain that's going into this head - valves, springs, retainers, shim under bucket...
All the words are here: http://blogs.insideline.com/roadtest...rain-tech.html
#39
Latest installment details the Supertech valvetrain that's going into this head - valves, springs, retainers, shim under bucket...
All the words are here: http://blogs.insideline.com/roadtest...rain-tech.html
#40
In a few years I'll have a Mech Degree. I'll work for ya Hustler. Prior Military so if the Zombies come I could be an asset. Wife is in school for the finer side of chef so you could be well fed. I already learn from you via your threads. I always have odd ideas that probably won't work. A little bit of explosives training, couldn't hurt. Plus I like a good drink here and there (Bud Light is pee). My only downside is I have lost faith in man kind and I work a little on the slow side due to being a bit methodical and ---- retentive. But done right once is better than wrong twice.