Cam Cap Orientation
 

Just got done doing my valve guide seals.

I made sure to organize the cam caps as to which one goes where, but I forgot to mark what was the front and the backside of the cap .

The arrows on the cam caps should face towards the front of the engine right?

I made this same mistake once, and I figured it out, but I cannot recall the orientation for the life of me...
Best pics I can find are here
https://www.miataturbo.net/miata-par...ad-cams-64315/

The orientation is the same way the machine punched numbers are. So look at the cam seal front cap cos it can only go on one way unless you are retarded. Look at the machine stamped letter and number (I1, intake, number 1) and follow those stamps, seeing as they are stamped last, if you go on the cast in letters you will be wrong.

Dann

dry fit them and you will either get a circle or something like this:

https://www.miataturbo.net/attachmen...ine=1360360250

run your finger around the interior edge to verify there is no lip.

arrows should normally face forward from every motor ive touched.

Got it.
Arrows forward.
all the punched in numbers were upside down when looking from the front. Thanks guys.

The punched numbers need to have the same orientation.

Dann

They do dann.
Just stating that they were all upside down when viewed from the front.