coil on plugs
So with the valve cover bolted down, I decided to stick the toyota cops down the plug holes, just to see how it looks. The circular base of the cops hits the inside of the valve cover, and I don't feel them snapping down on the tops of the spark plugs. Is this a common problem? Don't worry about it? Trim the base of the cop so it can go down another 1/4 inch?
|
Picture?
|
1 Attachment(s)
https://www.miataturbo.net/attachmen...ine=1459716852
There is no definitive snap like there is with the wires. |
What spark plugs?
|
Can't remember but I think bKR7e
|
The guy I saw running those cut two small flats on opposite sides for the cam lobes.
|
This look fine.
|
|
I like that hornetball, already made ready to go. I spent about an hour making my own bracket, after which I figured I made it too wide. I'm sure I can cut it down for it to fit, but this is a much cleaner solution.
My issue is I don't think the spring on the inside is contacting the spark plug. It does not feel like it's snapping down like the stock wires do. I think removing the rubber spacer and cutting flats, like deezums said, will help. I just wasn't sure if I was doing something wrong. |
Mine don't snap down. No issues.
|
Yeah, the Toyota COPS don't "snap." That's why they have the bolt hole -- they're meant to be fastened down.
Look at it this way, the TSE bracket is half the cost of the new HG you didn't need. ;) |
All times are GMT -4. The time now is 05:17 PM. |
© 2024 MH Sub I, LLC dba Internet Brands