I have Toyota COPS but don't understand how they really work. Consider my understanding of electrical systems on the same degree of ignorance as the Jerse Shore cast.

Dude i was able to run 30 psi with my stock msm coils with zero blow out just by switching to iridium ngks gapped at 30

I just looked at the suggested wires here:
http://www.megamanual.com/seq/coils.htm

I saw a pic of the FaeFlora setup, What wires are you running? My coils are being shipped and i'm still researching the wires.

On this thread, Nickt93 has a cool setup, wonder what wires he is running? Looks like stock plug end, with the LS coil end.
https://www.miataturbo.net/showthrea...t=55197&page=2

Were you running them one step colder, or just the regular heat range?

Exactly - they are a set of Miata Jackson Racing wires with LS coil ends grafted on.

How'd you accomplish that mess without tearing things up? Looks really clean..

I'll have to post up some pics to show you how the LS ends meet up with the Miata wires. I can't take credit for it - the wires were on the car when I bought it.

I have some old ls wires from my truck for boots and some new springs from a small block chevy that I could crimp on if they fit. I'd like to hear how yours was done

Damnit guys this is not rocket surgery. If I did it so can you.

Again:

4 wires per coil:

hot
power ground
signal
signal ground

bus the hots together and run them to your old coil or ignitor or whatever power source
bus the power grounds together and run them to your old coil or ignitor or whatever ground
bus the signal grounds together and ground them somewhere far away from your power ground FTW
run each signal wire to your ems or whatever that makes spark signal

The LS plug wire booties will fit shittily into the miata head. You will need some miata plug wire booties. Or just deal with them fitting shittily. I had magnecors made. I called them up and was like, make me some wires bitch, I need x feet long and they were like "ok".

Come on customstreetmachines, you are really letting your username down :(

BTW what turbo are you running?

Awe man, I can make plug wires, but it's always easier to ask someone how they did it. I'm a cheap ass cause my ex wife gets all my money, so I might just bastardize some Miata wires and use gm coil end boots. I'll figure something out when my coils arrive. Electrical wiring is no problem. I wasn't asking about that. I may be a tard, but I'm capable.

I'm running the GT2560R.

Hey Faeflora, how much did those wires cost ya ?

Does anyone have any pictures of GM coils being used? I am curious as to how that is setup on these cars, and I was wanting to show my adv. electronics instructor up at the community college how these are laid out!

Lots. $130 or soemthing.

Call em up with the length and they will give you the price over the phone. I got logn wires in case I wanted to move my shiz around.


BTW BTWBTW BTW BTW BTW BTW

The LS coils I have are fairly sensitive to dwell settings. Just make sure that you have the correct tables for your particular coils. The dwell settings are different between the various coils.

I was having a regular misfire at 7600rpm that I fixed by taking out only .5ms of dwell at that RPM.

Just talked to Steve at Magnecore, they're awesome. Quoted $125, DEAL!! I'm gonna get my coils mounted this weekend to get better measurements. Looking to build a mount for the stock coil location. I'm cutting the coil connectors and installing weather pack connectors in line, so I can go back to stock anytime.

The dwell info is good to know. Are you running max around 5.8ms ? I'll have to mess around with my Hydra until I get it right. I've seen a few places to get the dwell tables.

I'm running the NGK ZFR6F-11 plugs and Jeremy suggested the NGK R5671A-7, I'd also be up for suggestions.

BTW, I have connectors, contacts and seals for these coils in stock.

BOneeeerrRRRR


What coils do you have again? I have the LS2 nonheatsink truck coils.

Chpsnmw6 or whatever has the dwell maps if you ask nicely.

You will have to set up dwell by volt and also dwell trim by rpm.

I think my max is 4.6? If you have my coils I will give u the settings.

I got the LS2 with heatsink coils. I've emailed Jeremy at FM, since I think he already has the table built for the hydra. I haven't even built a mount or ordered my wires yet, so I've got time to look up the dwell trims.

He has the table for ls3 coils which is different... Try searching ls1tech for your dwell table.

Trying to find as many as possible to look for differences. This table seems to come up often

2004 Silverado 5.3 LS2 Truck coil

http://forums.nicoclub.com/another-s...435099-40.html

I can make a curve from that, but I might pull a little time and creep up on it, but I'm not done researching yet.