Flow Force 640 to ID1000 injectors, same adapters?
 

Quick question.

I currently have Flow Force 640 injectors, and found a great deal on a set of ID 1000 injectors, but its a set for another vehicle.

Are the FF and ID injectors all ev14 and same body size and shape? will my FF adapters fit the ID1000 ?

its my understanding that all ID1000 injectors are basically same injectors and what sets them apart are just the adapters ID supplies with each car application. correct?

1) make sure injector dimensions are same as you need. they're not all same size
2) yes. no. yes they should
3) no. different sizes, different guts, different nozzles, etc.

Thanks.

Im looking at a set for a 240sx. from ID website both applications use the 60mm body injectors:
ID1000 Injectors - Injector Dynamics
Click the dimensional drawings tab. they basically have 48mm and 60mm bodies, rest is just fuel rail diameter 11 or 14mm. which on a 60mm body is just the rear adapter size.
this makes me assume 240sx and miata injectors are the same for ID1000, with just different pigtails.

240SX-S13/S14/S15 (11mm) 1000.60.11.14.4 $480.00

240SX-S13/S14/S15 (14mm) 1000.60.14.14.4 $480.00

Miata 90-05 1000.11.02.60.11.4 $480.00

ill call ID tomorrow to confirm this as well.

ok, never mind, they turned out to be bosch injectors, not branded Injector dynamics, so i passed on them.

mods can delete this thread, its useless.

Weren't the ID1Ks rebadged boschs with the 1050s being a new design?

For anyone viewing this thread now, older ID1000s were never branded with injector dynamics. They scratched out the serial number too! So dont go assuming someone is scamming you who claims to have ID1000s, they are probably legit, like I suspect the one's mentioned in this thread were.