forged conrods
Please, is it possible to fit these conrods to oem BP-Z3 engine pistons (10:1 cR) without any modifications?
H Beam Con Rods Rod for Mazda MX5 MX 5 Miata B6 BP 1 6 1 8 133mm Arp 2000 800HP | eBay the rods dimensions: -C-C length: 133mm -Big End Diameter: 48mm -Pin Diameter: 20mm -Big end width: 21.84mm -Small end width: 21.84mm Seller wrote me: "Our rods can't fit wrist pins on oem pistons but only floating pistons.If the dimensions are the same, please turn to a qualified mechanic for help to look for a floating piston and fit them on your car. It's a not difficult project only if the dimensions are right" Is it true ? I was thinking that oem miata pistons are floating pistons. Not wrist pins pistons like seller wrote me. |
OEM is floating wrist pin.
|
MAZDA1 6 1 8L B6 BP H Beam Rod 5 230" 323 Miata Protege 4pcs Set w Arp Bolts | eBay
says they ship worldwide |
Thanks, so both should fit without pin modifications to stock 10:1 pistons.
|
Originally Posted by elektron
(Post 1302332)
Thanks, so both should fit without pin modifications to stock 10:1 pistons.
|
Im running the exact rods i listed on 150k pistons and pins. The oem rods are floating type.
|
All times are GMT -4. The time now is 02:30 AM. |
© 2024 MH Sub I, LLC dba Internet Brands