Gauging interest-Rad hose relocate
3 Attachment(s)
I recently did this on my car and really cleared up lots of room. I was wondering if anyone else would like this option without having to DIY. This still retains the heater. I used a regular coolant hose (about 1' long) but didnt realize that it was right in the path of my intercooler pipe. Instead i used a flex hose.
60$ shipped with a 20$ core charge (that way you have no down time). Thoughts? Attachment 201797 Attachment 201798 Attachment 201799 Power steering may work. Not AC compatible Thought... Opinions? |
I think it's too easy for people to just flip it around, which is also prettier. Them again i have a strong diy attitude. Put a wire wheel to it before you post pictures too.
|
flipping it may be easier and prettier, but you'll lose the heater option. Or spend more time/money to make that heater hose work when flipped...
|
I've say it before, you can flip it around and cut the hard pipe, then clamp the hardpipe in place. run a length of heater hose from the copper return fitting back round the front to the cut hardline...
|
which is about as pretty as the option in the first post ;)
|
Let me clarify. Once I receive your core, you will be refunded 20 dollars. So total price in 40$. If anyone wants more pictures let me know.
|
All times are GMT -4. The time now is 08:20 PM. |
© 2024 MH Sub I, LLC dba Internet Brands