Getting ready to remove A/C unit
Hi,
I'm about to remove the A/C system on 90 Miata. What kind of belt do I needed for power steering pump after I take the A/C pump out ? Thank a lot ! |
Wow! Belt with PS and AC - AC= belt with PS
unreal |
On the front of the block when you remove the AC and bracket there is a whole you need to put a new bolt in. If you do not then oil will slowly seep out of it. Search on m.net for the correct bolt size.
|
I believe it is a m8 1.5
To answer your question. Just take a measurement of what you think you need and any parts store should be able to help you out just by you giving them a length. Also, you could drive it without the belt on there to the store to make sure you get it right. It will just be hard to steer. Nothing will happen really. |
M8x1.25x45mm ;)
|
Damn off on the pitch...
|
Originally Posted by localtech
(Post 543722)
Just take a measurement of what you think you need and any parts store should be able to help you out just by you giving them a length.
Napa has them under part numbers PBH 4K338, NBH 25040338, and ATM 4PK855 (three different manufacturers, same fitment.) |
Thx for the helpful info !
I most likely get it from Karen/Pro shop. We order part over there everyday and free delivery. |
All times are GMT -4. The time now is 01:27 PM. |
© 2024 MH Sub I, LLC dba Internet Brands