Got the turbo now which intercooler?
 

Hi guys,
After all your extremly helpful advice about which turbo kit ot go for i thought id pick your brains again.
Iv had a good read through some intercooler threads and have done some looking for an intercooler kit.
Would you please give me your honest oppinions and let me know which kit will work or send me a link to somehting else.
To be a pain im after red silicon hoses.
THanks and let me know ;) Check the links below

No.1

FMIC INTERCOOLER+ TURBO PIPING KIT MIATA RX7 PROTEGE TC:eBay Motors (item 120460524978 end time Aug-25-09 18:40:19 PDT)

No.2

R 27 Intercooler+2.5 Piping Kit S2000 Miata RX7 RX8 MR2:eBay Motors (item 250482280357 end time Aug-19-09 17:43:22 PDT)

No.3

Turbo Intercooler+Piping Kit Miata RX7 RX8 Eclipse TT R:eBay Motors (item 290339485912 end time Aug-19-09 17:25:23 PDT)

Aren't those all the same?

If the pictures are accurate, there's a variance in the included bends.

All are of tube-n-fin construction. Less restrictive (relative to bar-n-plate) to air flowing through to the radiator, but more restrictive to air passing though from the turbo to the intake.

so would you recomended a bar-n-plate construction over a tube-n-fine construction or is it a very small difference?
let me know what you think of this kit also with bar-n-plate:

CXRacing Intercooler 2.5" Piping Kit Celica CIVIC MIATA:eBay Motors (item 370206544455 end time Aug-22-09 23:02:24 PDT)

Wasnt this covered on your previous post??? :hustler:

i was recomended to look at cxracing but after reading the threads im concirned if the one im looking at is going to be to big and also with the 2 different types of intercooler im trying to discover the diffferences to refine my options.

NeoGenesis and I are rocking that intercooler...I prefer it over my old two eBay bar and plates...

which one?

the intercooler in all three of your links are the same....so that one.

ok thanks alot ill go for one of them then. ;)

will i also need to relocate a radiator hose?
if so hows the best way to do that?

if you make the turbo outlet point down, then yes.

I used a universal flex hose myself.

right ill look into that a bit more when its all fitted.

i dont spose yo ugot my pm about a megasquirt ecu did you?

Again after you advice and all the information in other threads i went for this intercooler:

FMIC INTERCOOLER+ TURBO PIPING KIT MIATA RX7 PROTEGE TC:eBay Motors (item 120460524978 end time Aug-25-09 18:40:19 PDT)

It came with more parts that most other kits on ebay and with the money i saved i bought a blow off valve with cast flange for $42 with free shipping, ready to bolt on.