Headgasket
Hi
I am going to lift the head on my 1,8 so I figured i might as well change the headgasket, (It is not blown) The plan for this season was not to build the engine (that will come later) For this season I am going to run a TD04 setup on E85 and decent tune My question is, is it a good idea to get a thicker headgasket to lower the compression? |
It's a good idea to search the forums for the answers to your questions before asking them.
For instance, you could type "site:miataturbo.net thicker headgasket" into Google, and the first 6 results or so are threads which discuss this specific topic and include answers to this question. |
Thicker the better. Id say about 1/4" would do wonders.
|
Originally Posted by Savington
(Post 1515527)
It's a good idea to search the forums for the answers to your questions before asking them.
For instance, you could type "site:miataturbo.net thicker headgasket" into Google, and the first 6 results or so are threads which discuss this specific topic and include answers to this question.
Originally Posted by Full_Tilt_Boogie
(Post 1515528)
Thicker the better. Id say about 1/4" would do wonders.
|
Dude do you really think anyone here is running a 1/4" gasket. NO
|
Originally Posted by matrussell122
(Post 1515533)
Dude do you really think anyone here is running a 1/4" gasket. NO
|
Well, I tried.
|
Originally Posted by Svensk
(Post 1515535)
i am not familiar with inches, might as well ask right?
|
2.54 times larger if I remember right
|
I would LOVE to see someone run a 1/4” thick head gasket. Just for the lulz. |
Originally Posted by matrussell122
(Post 1515559)
2.54 times larger if I remember right
|
All times are GMT -4. The time now is 08:49 PM. |
© 2024 MH Sub I, LLC dba Internet Brands