help to get 250whp?!?!?!?!!!!!
hey everyone!
well i currently have a 1990 1.6l miata with a greddy bolt on turbo kit everything is stock. i wanted to know if i can get some opinions or thoughts on what i should get to reach around 250 hp to the wheel?? if you can a list with reasoning would be awesome!!! thanks guys |
Oooooohhh boy...
|
3rd post ever, and is a definate noob post. I'll try to give some advice even though I don't have a 1.6 liter. I'd say, ABSURD FLOW, upgrade to a 19T wheel, MSPNP, RX-7 550's, FM Level II clutch, and you MIGHT get close to your goal.
WAIT, you just said your car is totally stock with a greddy kit? What are you running 5psi with no intercooler? Then guess what...YOU AIN'T MAKIN SHIT! Upgrade somewhere towards what I mentioned above, and you will be more than happy even if you only end up making 235whp. |
Rtfm
|
You need 5k atleast.
|
moar boost?
|
Originally Posted by pdexta
(Post 521791)
moar boost?
|
The greddy turbo will start to choke past 240-250 whp and you will just be blowing hot air into your combustion chamber. You will need,
Intercooler, 2 1/2" downpipe 3" exhaust 550cc injectors Megasquirt (either PNP or DIY) Wideband And probably WI will get you the last 20hp As well as some dyno time Now for your car to utilize that power you will need Stronger rear end (torsen or rx7) Clutch with higher torque rating Good tires Bigger brakes New shocks/springs (or coilovers) and start saving for a roll bar. I would suspect that around that goal your motor may bend a rod. Cheers. |
Originally Posted by acusido2
(Post 521779)
if you can a list with reasoning would be awesome!!! thanks guys 1. A check 2. A pen 3. A first grade education, such that you can write the words "Three Thousand Dollars and No Cents" on said check with said pen The upgrade from stock GReddy to 250whp involves changing everything except that turbo, and even then you'll make it more easily if you change that too. You're better off selling your kit and building a T28-based kit using Bell or FM parts from the classifieds. Read the DIY FAQ and learn how, or sell your kit and write a big check - you can reach your goal either way. |
You need:
-engine management -downpipe -bigger injectors -exhaust -intercooler -boost control you will keep: -greddy manifold -greddy turbo Don't let the anti's get you down. I made above your power goal for 25k miles with my greddy set up before I moved on to a newer car. My dyno |
you're a ------.
|
My sig... That number was before upgraded wastegate and only at 12psi, now 15psi and gt28 wastegate actually holding boost
|
Originally Posted by acusido2
(Post 521779)
hey everyone!
well i currently have a 1990 1.6l miata with a greddy bolt on turbo kit everything is stock. i wanted to know if i can get some opinions or thoughts on what i should get to reach around 250 hp to the wheel?? if you can a list with reasoning would be awesome!!! thanks guys you need 460-550cc injectors a 3" exhaust an intercooler an engine management ECU a better wastegate and about 14-16psi. your clutch and rear might not like it. |
All times are GMT -4. The time now is 08:37 AM. |
© 2024 MH Sub I, LLC dba Internet Brands