I need oil pump measurements. From you.
Got a stock oil pump lying around? (Doesn't matter if the gears are shattered to hell.) I need some help.
Specifically, I'm looking for a measurement of the thickness of the oil pump gears. Gotta be precise- micrometer preferred, good digital calipers acceptable (but I'll make fun of you for not owning the proper tools.) I need data from a late-production '99 or any '00 model year (non-VVT), and also from any year of VVT engine. I already have on-hand what I believe is an early-production '99 gearset (gotta check my old paperwork for the VIN). If anybody has a late model NA, that'd be a good dataset to have on-hand for cross-referencing, too. And if you don't have a stock pump handy from one of these years, well, you're pretty damn worthless to me then, aren't you? Why don't you just go somewhere else. |
Travis measured one from a 2001 motor that I was in posession of.
I suppose that is simply circular information to you though. PS are you taking strong cold medicine with your rum and cokes for the last couple days? |
Originally Posted by y8s
(Post 698513)
PS are you taking strong cold medicine with your rum and cokes for the last couple days?
|
you've started some kooky threads lately.
|
Isn't there a watermelon that needs pushing out a lake somewhere? :D
|
Originally Posted by y8s
(Post 698513)
Travis measured one from a 2001 motor that I was in posession of.
|
Originally Posted by y8s
(Post 698513)
PS are you taking strong cold medicine with your rum and cokes for the last couple days? |
Originally Posted by Faeflora
(Post 698573)
I think he quit the rum and is only on coke of the Columbian variety.
|
oh lol :)
|
Originally Posted by y8s
(Post 698522)
you've started some kooky threads lately.
|
Originally Posted by Stein
(Post 698531)
If the one that he measured is the one that I measured on our optical CMM when designing the billet ones, I still have those gears in a drawer at home. I can get the thickness measurement but I don't know if they are the 2001 gears.
|
So I checked the VIN on Jessica's oil pan. JM1NB353XX0136036. According to the 10AE FAQ (the donor was a 10AE), that gives it a production date of March 25, 1999, after the cutoff point.
Now, to find the gears from the oil pump so I can measure them... |
I have a blown 2001 block I'll be pulling out of the car. I could likely get you the measurements sometime after the 20th.
|
Originally Posted by y8s
(Post 698657)
I got the whole pump back and sold it. So either that's not the pump or someone's got reeeeeeeeal low oil pressure right about now.
|
I have an oil pump for a 1.6l new I can grab measurements off tomorrow, unfourntaly I am a boy and not a man since I don't own a micrometer. ahh nvm you want newer years
|
|
if you want the info i will throw a mic on my stock gear joe i dunno if it will help you in any way shape or form but i believe we all got the same gears past 1992
|
I think I saw a set of stock gears in the junk drawer in the kitchen today. I'll check tomorrow. They'd be out of a '99 pump if they're there (brand new stock gears out of my current pump).
|
All times are GMT -4. The time now is 09:19 PM. |
© 2024 MH Sub I, LLC dba Internet Brands