I wana go fast.....HELP!!!!!
Ok I recently just bought a 1991 Mazda Miata MX-5 1.6l w/ 5sd I just wana go faster ik if i turbo it ill be able to but im afraid if i turbo it ill start throwin rods and pistons....im open to anything even engine and tranny swap because i planned on putting a 6 spd in it but im just too dumb with foreign cars idk what to do or what to put in it.....I wana beable to put the biggest engine and tranny i can fit in it...so if you could PLEASE HELP
|
Whoa, slow down.
This is what that should have looked like: Hi, I recently just bought a 1991 Mazda Miata. It has the 1.6L and a 5spd. I'd like to increase the power, but turbos scare me. I've heard there is a chance to throw a rod or piston. I'm open to anything, even if it means swapping in a new engine and trans. I plan on putting in a 6spd anyways. I don't have much experience with foreign cars, so I'm open to suggestions. What would you recommend for the most power. There now that we have something understandable... Many people do v8 swaps. The info is out there, you need to do some research though. You can also go the turbo route, it is only as safe as you make it. Ensure you are starting with a good engine, use proper engine management, and with a good tune you will be fairly safe. |
Originally Posted by wstimatze
(Post 765520)
Ok, I recently purchased a 1991 Mazda Miata MX-5 1.6l w/ 5spd. I want to go faster. I know if I install a turbo it will be faster. However, I am afraid if I turbo the car it will start throwing rods and pistons. I'm open to anything, even engine and transmission swaps because I planned on putting a 6 spd in. However, I am not familiar with foreign cars. I don't know what to do or what swaps are possible.I want to be able to put the biggest engine and transmission I can properly install. Any advice is greatly appreciated.
EDIT: Please install a huge V8 so I can rape it with my 1.6 |
Please read the FAQ... :inout:
|
Originally Posted by wstimatze
(Post 765520)
im afraid if i turbo it ill start throwin rods and pistons.
I wana beable to put the biggest engine and tranny i can fit in it...so if you could PLEASE HELP |
dudemanypeoplehavegonetheturborouteandnotblownupth ereshitk... dontbeafradetogoturboyoullbfineaslongasyuodoitrite kthanxbi
|
justcameintothisthreadandwantedtojointhegangbangdo ntknowwheretostart
|
^^^:giggle:
|
I found this turbo TD05 4G63 20G TURBO CHARGER+INTERNAL WASTEGATE UPGRADE would i be able to just put this in my car?------Turbo: Type of Wastegate - Internal Wastegate
Compressor: A/R: .49 Inducer / Diameter: 1.83" / 46.5mm Exducer / Diameter: 2.236 / 57mm Turbine: Inducer / Diameter: 2.20" / 56mm Exducer / Diameter: 1.93" / 49mm I just wana make this thing fast without blowing up the engine....if this turbo could possibly fit in my car which im certain it can what should the psi be at.....BOV? could i even put a tank of NOs in it? |
Originally Posted by wstimatze
(Post 765553)
could i even put a tank of NOs in it?
Stop feeding this pussy. |
You really need to read the stickies, your questions are answered there. Believe it or not, your not the first person to come here and ask questions regarding what is necessary to turbocharge a 1.6 Mazda Miata.
|
Originally Posted by viperormiata
(Post 765554)
troll.
Stop feeding this pussy. |
I just used my new sandwich cooker thingy and it was delicious!
|
If you want to go fast, get two magnets. Attach one to the front of your hood. Now get a large pole, and attach the other magnet to it. Now mount this pole on your hood and position it so that the magnet attached to the pole hangs in front of the magnet on your hood. You now have infinite power.
http://bradcrabtree.files.wordpress....nowskisigs.png |
Ooookkkk
Could someone tell me just what 6 Speed Tranny my B6ZE(RS) 1.6L will hook up too? I have read where guys are using the 01 miata's 6 Speed I'm just curious if maybe I should just stick with my 5spd? |
1t gon h00k up t00 urANUS
But seriously all of us serious racers use 16 speeds from semi trucks |
The honey badger dont give a fuck.
|
Newb.
Try making an intro post in the MeetnGreet section so we can get to know you better. It's hard to give specific advice without knowing your technical capabilities, experience, and equipment level. Then read all of the stickied FAQs and write-ups. They're infinitely valuable. I'll be nice and give you your first piece of real advice: Read into engine management first if you don't like picking up chunks of motor off the street. Everyone that is scared of turbos has one thing in common: They're also scared of proper engine management theory and application (aka tuning). |
Originally Posted by wstimatze
(Post 765553)
I found this turbo TD05 4G63 20G TURBO CHARGER+INTERNAL WASTEGATE UPGRADE would i be able to just put this in my car?------Turbo: Type of Wastegate - Internal Wastegate
Compressor: A/R: .49 Inducer / Diameter: 1.83" / 46.5mm Exducer / Diameter: 2.236 / 57mm Turbine: Inducer / Diameter: 2.20" / 56mm Exducer / Diameter: 1.93" / 49mm I just wana make this thing fast without blowing up the engine....if this turbo could possibly fit in my car which im certain it can what should the psi be at.....BOV? could i even put a tank of NOs in it? |
Originally Posted by wstimatze
(Post 765572)
Ooookkkk
Could someone tell me just what 6 Speed Tranny my B6ZE(RS) 1.6L will hook up too? (This isn't a smartass answer, there was only one Miata 6-speed transmission, offered as an option in the '99 and later cars.) I have read where guys are using the 01 miata's 6 Speed I'm just curious if maybe I should just stick with my 5spd? |
All times are GMT -4. The time now is 10:48 PM. |
© 2024 MH Sub I, LLC dba Internet Brands