Just some 3D printed parts
 

I finally caught the printing bug. Here are few items I'm messing with.
https://cimg7.ibsrv.net/gimg/www.mia...f48e779579.jpg
How cool would something like this be?
https://cimg9.ibsrv.net/gimg/www.mia...9dadf15583.jpg
An end cap for my splitter. Cones (and ankles) be damned.
https://cimg3.ibsrv.net/gimg/www.mia...074acab303.jpg
Flyin Miata 5 hole plate with block of plates.
https://cimg9.ibsrv.net/gimg/www.mia...741c6705d4.jpg
Automatic engine blipper made from a chainsaw throttle, a solenoid, and some 3/4" hose.

join the FB group - plenty going on over there

I'd love to get the stl for that block off plate if those gauges are 52mm. One less thing for me to design.

Agreed with shirtz, sadly a lot of the action is on facebook.

DCBE Tech sells a great 3d printed spat for the NB2. Sadly, they only sell the finished part and not the file, but here's some inspiration.

https://cimg0.ibsrv.net/gimg/www.mia...3d7b43d417.jpg

Lookup 52mm Gauge Blanking Plate on OnShape

What is the facebook group called? I might have to dust off the ol' spy account.

can you explain the engine blipper?

It's a small valve that opens when the brake and clutch are pressed. Magic happens in the ecu and the engine rev limit is set to the correct rpm for the shift.

What material are you printing the aero pieces with? I should get a FDM printer, I have a resin one for printing miniatures. My buddy does have an FDM printer and he designed and printed a set of brake duct adapters. He designed a plug into them so I can plug them when I'm driving on the street or autocross.

https://cimg1.ibsrv.net/gimg/www.mia...95137238a3.jpg
https://cimg2.ibsrv.net/gimg/www.mia...e06cbaf7aa.jpg

https://cimg4.ibsrv.net/gimg/www.mia...fa3465968c.png
https://cimg5.ibsrv.net/gimg/www.mia...e49a55285c.png

Fog light delete.
https://cimg5.ibsrv.net/gimg/www.mia...a89dbcb776.jpg
https://cimg8.ibsrv.net/gimg/www.mia...3ab592f183.jpg