Miata Turbo Forum - Boost cars, acquire cats.

Miata Turbo Forum - Boost cars, acquire cats. (https://www.miataturbo.net/)

- Engine Performance (https://www.miataturbo.net/engine-performance-56/)

- - low impedance injector (https://www.miataturbo.net/engine-performance-56/low-impedance-injector-73239/)

mazdahokey1

06-08-2013 10:43 AM

low impedance injector

hey guys im going to install rx7s4 460cc low impedance. im not sure which wire to solder in a resistor.Ive heard it doesn't matter but im still not sure.

Leafy

06-08-2013 10:12 PM

You'd be better off selling them and buying the correct injector. Theres more to low z and high z injectors than the resistance.

mazdahokey1

06-10-2013 02:07 AM

i really need to install them and get the car moving.so if anyone could tell me it would be greatly appreciated.

mazdahokey1

06-10-2013 04:05 PM

i opened the harness and found that the 2 green and 2 yellows have no interference so im going to solder the resistors in those wires.

triple88a

06-10-2013 04:12 PM

Theres current difference And voltage difference.

2x on getting the correct pnp injectors.

Leafy

06-10-2013 04:12 PM

Quote:

Originally Posted by triple88a (Post 1020282)

Theres current difference And voltage difference.

2x on getting the correct pnp injectors.

And signal differences.

dieselmiata

06-10-2013 04:32 PM

Quote:

Originally Posted by mazdahokey1 (Post 1020053)

i really need to install them and get the car moving very poorly and in a way that will likely take more time and effort than getting the right parts.so if anyone could tell me it would be greatly appreciated.

There you go. All better now.

triple88a

06-10-2013 04:41 PM

Can a Low independence injector even open with the quarter amp they will be getting if u just install a resistor to get them to 14 ohms? Doubt it and even if they do i betcha they will have a hell of a dwell curve.

All times are GMT -4. The time now is 06:00 AM.