I was doing a VVT swap into my 95 m edition and i ran into a wall with the coils. They are the d585 coils used in lsx trucks i believe. I know they are getting power cause ive put a multi meter on them and checked, but whenever i try to crank the car they arent makin any spark. I am running a ms2 pnp if that helps solve my problem. Ive looked on every thread i can find and cant seems to figure this out.

Ill give it a shot when i get home. I currently have it wired up for wasted spark, would that affect the results of the test?

They are connected properly, I just double checked all the wiring and all that and it seems right. I tried to run the test but I dont believe it was doing anything? I was lookin at the option port and saw that it has a pins for spark output a-d. If I hook one bank of coils up to a (1/4) and the other to b (2/3), would it provided signal properly? Id still leave the 12v and stuff hooked up, just not the brown and brown/yellow wires.